Skip to main content
URL parameters are short tags added to the end of a link, such as comet_source and comet_ad_id, that tell Cometly which ad a click came from. A Meta (Facebook) carousel ad has a separate link on each card, so for Meta carousel ads the URL parameters go on each card of the ad. This matters because a visitor can click any card. With the parameters on every card, Cometly can attribute (tie back) the leads and sales from each click to the carousel ad, and your reports show what that ad produced.
  1. In Meta Ads Manager, go to the ad level and select the carousel ad you want to track with Cometly. Find the Ad Creative section and its Carousel Cards.
  2. Each carousel card has its own Website URL box. Paste the Cometly URL parameters at the end of the Website URL of each card in the ad.
The examples below use the Meta Ads parameters. Use the parameters for the ad platform you are setting up. You find them in Cometly under Setup, step 4 Add URL parameters to your ads.

Example

If the URL on your carousel card is:
add this to the end of it:

Example with a variant URL

If the URL already contains a parameter (such as a variant), append the Cometly parameters with & instead of ?. If the Website URL on your Facebook ad is:
then instead of adding:
add:
So your final Website URL is:
For more on this case, see URLs that already have parameters.

Before you publish

If you also use a link to your website in the Website URL box in the destination section of the ad, add the Cometly URL parameters to the end of that URL as well. Make sure the URL parameters box in the Tracking section at the ad level is completely empty. Now you can publish your ad. Use this setup on every carousel ad so Cometly can track and attribute them correctly.

Check it worked

In the Cometly Ads Manager, select your Meta ad account, open the Columns menu and choose the preset Tracking Status, then click the Ads tab. The Ad Links column shows the links the carousel ad carries, and the Tracking Status column shows Normal when the parameters are in place. Allow up to 1 hour for the next data refresh before the change shows.

Frequently asked questions

Cometly reads your ads’ links each time it refreshes your ad data, so a fix does not show right away. Allow up to 1 hour for the next data refresh. If the red dot is still there after that, check that every card’s Website URL ends with the Cometly parameters, including comet_ad_id={{ad.id}}.

Where do I find the Cometly URL parameters for Meta ads?

In Cometly, click Setup in the left sidebar and open step 4, Add URL parameters to your ads. Choose Meta Ads under Select integration and click Copy Parameters. A click on that card does not carry the information Cometly needs to attribute it to the ad. Cometly still tracks the referrer (the site the visitor came from), but the referrer is not always passed correctly, so some of that traffic can show as “No Source” in your reports.

Next steps

Still have questions or need a hand? We’re happy to help. Reach our team at support@cometly.com.