Skip to main content
You made sales in BuyGoods, but they do not appear in Cometly: no Purchase shows on your ads in the Ads Manager. When BuyGoods sales are not showing in Cometly, the cause is almost always a short data delay or a missed setup step. Cometly learns about a sale when BuyGoods sends it a postback (a message BuyGoods sends to your Cometly Postback URL each time a sale occurs). That postback has to carry the ID of the ad the buyer clicked. If the postback never arrives, or arrives without an ad ID, the sale cannot show on your ads. Work through the checks below in order.

Start here

If you have sales in BuyGoods and do not see them in Cometly, one of the following is happening:
  1. BuyGoods data delay: Cometly takes between 15 and 30 minutes in some cases to display BuyGoods sales.
  2. BuyGoods integration set up incorrectly: You missed a critical setup step, so Cometly is not tracking.

Check the Events Log first

Every postback BuyGoods sends to Cometly is recorded in the Events Log. In Cometly, go to Events Manager > Events Log and look for rows from BuyGoods around the time of the sale.
  • No BuyGoods rows: BuyGoods is not sending the postback to this space (a space is a separate workspace in your Cometly account). Check the Postback URL.
  • A BuyGoods row with an error in the Details column: the postback arrived but could not be processed. A postback that arrives without an ad ID is rejected, which points to the landing page scripts or the URL parameters on your ads.
See Use the Events Log.

Check your BuyGoods integration setup

Each check below points to a step of the BuyGoods integration setup guide.

Add the Cometly Postback URL to BuyGoods

The Cometly BuyGoods Postback URL sends purchase data to Cometly every time a sale occurs. Make sure you followed the step “Add the Cometly Postback URL to BuyGoods” in the BuyGoods integration guide. Each space has its own Postback URL. If you use multiple spaces in Cometly, make sure you copied the Postback URL from the correct space: switch to that space, go to Integrations > BuyGoods, and compare the Postback URL with the one you added in BuyGoods.

Add scripts to your landing page

Add all of the code from the setup guide to your landing page, so the URL parameters from your ads pass correctly to BuyGoods. See the step “Add scripts to your landing page” in the BuyGoods integration guide.

Install the Cometly pixel in your BuyGoods offer

Install the code on the offer you are running traffic to. If you run multiple offers, complete the setup for each offer. See the step “Install the Cometly pixel in your BuyGoods offer” in the BuyGoods integration guide.

Track VSL and checkout metrics

If you do not see the View Content (VSL/TSL visits) and Initiate Checkout (checkouts) events in Cometly, the scripts on your BuyGoods offer are set up incorrectly. Install the code on the offer you are running traffic to. If you run multiple offers, complete the setup for each offer. See the step “Track VSL and checkout metrics” in the BuyGoods integration guide.

Add URL parameters to your ads for traffic going to BuyGoods offers

If your parameters are set up incorrectly, Cometly cannot track the BuyGoods data back to the correct ads. BuyGoods uses its own URL parameters, which differ from the standard Cometly ones. Follow the Meta, TikTok and Google instructions in the URL parameters step of the BuyGoods integration guide.

Connect your ad accounts

If your ad accounts are not connected to the space, the Ads Manager in Cometly has no data to show, because Cometly is not pulling any data from your ad accounts. Connect them under Integrations > Ad Platforms. See Connect ad platforms and ad accounts.

Import active campaigns and turn on tracking

If you are not seeing any data in Cometly, tracking may be turned off for your campaigns. Tracking must be turned on for Cometly to track them in the Ads Manager. Go to Settings > Campaign tracking to import existing campaigns and turn on tracking. See Manually turn on tracking for your ad campaigns.

Confirm BuyGoods sales are showing in Cometly

After your next BuyGoods sale that comes from an ad click, go to Events Manager > Events Log. You should see a row from BuyGoods around the time of the sale, with no error in the Details column. Within 15 to 30 minutes, the sale shows as a Purchase on the matching ad in the Ads Manager.

Frequently asked questions

Does Cometly show BuyGoods sales that did not come from an ad?

No. Cometly does not display BuyGoods sales that have no ad ID. A postback that arrives without one is rejected, and you can see it in the Events Log with an error in the Details column.

Do I need to add the Cometly Postback URL to each BuyGoods offer?

No. Add the Postback URL once, on the main AffOverview page of your BuyGoods account. If you also add it in the settings of a specific offer, purchases fire twice. The Cometly pixel is different: install it on every offer you run traffic to.

What do the red dots next to my BuyGoods campaigns mean?

Red dots (tooltip UTM Setup Error) next to campaigns, ad sets or ads usually mean there is an issue with the URL parameters on your ads. BuyGoods needs its own URL parameters, which differ from the ones on the Setup page in Cometly. Use the parameters in the BuyGoods integration guide.

Next steps

Still have questions or need a hand? We’re happy to help. Reach our team at support@cometly.com.