> ## Documentation Index
> Fetch the complete documentation index at: https://docs.cometly.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Check for Google tracking templates at the ad group or ad level

> Find a Google Ads tracking template at the ad group or ad level that overrides your Cometly campaign template, and replace it so your ads track.

Your Google campaign has the Cometly tracking template, but some of its ads still show a red **UTM Setup Error** dot in the Ads Manager, or their clicks are not tied to the right ad. The usual cause is a second Google Ads tracking template at the ad group or ad level.

A tracking template is the Google Ads setting that adds tracking parameters to the landing page URL of each click. Google Ads applies the template from the lowest level that has one: ad level first, then ad group level, then campaign level, then account level. This means a tracking template at the ad or ad group level overrides your campaign-level template, which can cause tracking issues.

[Check for Google tracking templates at the ad group or ad level video](https://www.loom.com/embed/6b46724d9ec1416ab1683729693bf42e)

## Check and update your Google tracking templates

**1. Open your campaign in Google Ads**

1. Log in to your Google Ads account.
2. Go to the campaign where you want to check the tracking templates.

**2. Add the tracking template column**

1. In your campaign view, click the **Columns** icon.
2. Choose **Modify columns** from the dropdown menu.
3. Under **Attributes**, find and add **Tracking Template** to your column view.
4. Click **Apply** to save your changes. You can now see the tracking template for each ad and ad group.

**3. Look for tracking templates at the ad group or ad level**

1. Browse through your ad groups and ads to check whether any tracking templates are set.
2. Pay attention to any tracking template that is different from the campaign-level template you want to use.

**4. Update the tracking templates**

1. If you find a tracking template at the ad group or ad level, click the ad or ad group to edit it.
2. Replace the existing tracking template with the Cometly tracking template. To copy it, go to **Setup** > **Add URL parameters to your ads** in Cometly, select **Google Ads**, and click **Copy Tracking Template** for your campaign type. See [Google Ads URL parameters](https://docs.cometly.com/getting-started/url-parameters.md).
3. Save your changes.

## Check each level in Cometly

You can also see which template each level carries without leaving Cometly:

1. Go to **Ads Manager** and select your Google ad account.
2. Add the **URL Params** column from the **Columns** menu.
3. Open the **Campaigns**, **Ad Groups** and **Ads** tabs. Each row shows its own tracking template. If your Google Ads account has an account-level template, it is shown above the table, next to **Account URL Params:**.

If an ad has a red dot, see [Fix UTM Setup Errors](https://docs.cometly.com/support/troubleshooting/url-parameters/utm-setup-errors.md).

## Important notes

* **Prioritization**: Google Ads uses the ad-level tracking template first, then the ad group level, then the campaign level, and finally the account level.
* **Consistency is key**: For effective tracking, keep your tracking templates consistent across your campaign.
* **Tracking at different levels**: If you place the Cometly tracking template at the ad group or ad level, it still tracks your campaign's performance.

## Confirm the fix

Open the **Ad Groups** and **Ads** tabs in the Cometly Ads Manager with the **URL Params** column added. Each row you edited now shows the Cometly tracking template. The change appears after the next data refresh, so allow up to 1 hour. Once Cometly reads the corrected template, the red dot on those ads goes away.

## Frequently asked questions

### How long does a UTM Setup Error take to clear after I fix the tracking template?

Up to 1 hour. Cometly keeps showing the red dot until its next data refresh reads the corrected template from Google Ads. See [how often ad data updates](https://docs.cometly.com/support/troubleshooting/ad-data/data-update-frequency.md).

### Which Cometly tracking template do I use for Performance Max or Video campaigns?

Each Google campaign type has its own Cometly tracking template: one for Search, Display, Discovery, Demand Gen and Shopping, one for Performance Max and one for Video. Use the template that matches the campaign the ad or ad group belongs to. You can copy each one from [Set up URL parameters](https://docs.cometly.com/getting-started/url-parameters.md).

### Do Microsoft Ads tracking templates work the same way?

Yes. Microsoft Ads also lets you set a tracking template on the ad, the ad group, the campaign or the account, and the lowest level that has one is the one that applies. Check each level in the Cometly Ads Manager the same way, with the **URL Params** column.

## Next steps

* [Add the Cometly tracking template to your Google campaigns](https://docs.cometly.com/getting-started/url-parameters.md)
* [Fix UTM Setup Errors on your ads](https://docs.cometly.com/support/troubleshooting/url-parameters/utm-setup-errors.md)
* [Fix URL parameters in Google Merchant Center for Shopping ads](https://docs.cometly.com/support/troubleshooting/url-parameters/google-merchant-center-url-parameters.md)
* [Connect and troubleshoot your Google Ads account](https://docs.cometly.com/integrations/ad-platforms/google.md)

Still have questions or need a hand? We're happy to help. Reach our team at [support@cometly.com](mailto:support@cometly.com).


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.